Numerating Continum
 Numerical Control
 Numerically Controlled
 Negative Computing

 .MNMS
 .MkSprj
 .mkesure
 .MK2Sprj

 View X
 View -X
 View Y
 View -Y

 Yes
 No

 Blue
 Pink
 Orange
 Red

 CTRL
 ATL
 Shift

 Show only the toolpath, not the block
 Show the material (without the toolpath) which was left behind to easily see the plunge depth
 Does nothing other than change the color of the block
 There is no such function in MN MakeSure

 It restores the machining simulation and the toolpath to how they were once the simulation was completed
 Shows an STL File
 Starts the simulation again
 Nothing but waste time

 0.5 |Which is 50%
 0.25 |Which is 25%
 2 |Which is 200%
 1 |Which is 100%

 A New 3D CAD File Format For Sharing Data
 The Odd 3D CAD File Format For Sharing Data
 An Obselete 3D CAD File Format For Sharing Data
 The Original 3D CAD File Format For Sharing Data

 It ReNumerates the loaded file into MN MakeSure's base format for a much quicker simulation without the need for MN MakeSure to use it's interpreters
 Nothing more than go to the top of the data
 Changes the color of the loaded file into Blue for the sake of doing it
 This function is planned to be added in the next version and therefore doesn't exit

 It sets the completed simulation into an easier view mode which uses less memory and can be returned to
 Removes the toolpath
 Loads a STL File
 Stops the current simulation

 Yes
 No

 45
 52
 15
 None, you have to make them

 To simulate toolpaths, so that you can see how far your machine will go whilst running the code and therefore prevent damage to the CNC Machine
 To waste peoples time
 To view only what a toolpath will generate
 It has no purpose

 Yes
 No

 Yes
 No

 Yes
 No

 X
 Y
 X, Y
 X, Y, Z

 Yes
 No

 Yes
 No

 Yes
 No

 Yes
 No

 Save NC, FNC File
 Save Data As Per Written
 Save NC File
 Save FNC File

 Complete
 None

 .dat
 .tdat
 .MNtoolDAT
 .xpa

 6 Days
 27.5 Hours
 1 Hour
 Roughly 10 Minutes

 Double clicking on the 3D simulation will restart the simulation
 Double clicking on the 3D simulation will invert the simulation
 Double clicking on the 3D simulation will return the view to the default view
 Double clicking on the 3D simulation will do absolutely nothing

 T1M6, T2 FB10, T3 FB12, T10 FT16R4, T15 FB12, T12 FC 20 A 45
 T1M5, T2 FC8, T9 FT82R9, T13 FT78R2
 T6 FB9, T2 FC 8 A 68, T9 FC 4 A 54.566
 T1 M8, T7 FB4, T8 FT123R9, T8 FT23R12

 Nothing
 Re-draws the toolpath very quickly
 Re-draws the block around the toolpath
 Re-draws the view